Self-regulating floor heating system for new building and renovationwww.energy-heating.comE-NERGY IQCLEVER HEATING WITH ELECTRICITYe nergywww.energy-heating.comApp-enabledControl via Smartphone2With the self-regulating system E-NERGY IQ, there is an alternative to hot-water underfloor heating, which can also be installed with gypsum fibre dry screeds. The self-regulating heating cable does not exceed the maximum temperature of 50°C. As the heating cables are inserted in exactly fitting heat-conducting aluminium channels, the floor warms up quickly and evenly. A quick and uncom-plicated installation and the possibility of single room use ensure low costs, as well as the elimination of a boiler room.Layer structure1Thermal conductive layer CF FLOOR PRO 12 – 12 mm2Underfloor heating E-NERGY IQ – 20 mm3Thermal levelling insulation CF FLOOR THERM (optional) – from 10 mm123System E-NERGY IQOnly 20 mm installation height of the system elements incl. thermal insulationPredefined installation gap of 150 mm for quick assemblyIntelligent, self-regulating heating cableIntuitively operated room thermostat with touch-display3Heating with electricity is too expensive, pollutes our environment and does not provide the required heat – that used to be!Thanks to new technologies and changes in the energy market, heating with electricity is becoming an ecological and economical alternative and brings unprecedented living comfort.Three good reasons for E-NERGY IQElectricity becomes green and is the energy of the future!New technologies such as solar- and wind energy are radically changing electricity production – electricity is becoming green.In 2017, more than 30% of Germany‘s electricity was genera-ted from renewable energy sources. By 2030, the share is set to rise to 50%, and by 2050 to over 80%.Heating at the push of a button! Switch on your light only when you need it! Why don‘t you do this with your heating too?E-NERGY IQ overcomes the limitations of previous underfloor heating systems with the intelligent heating cable. Fast, direct heat dissipation and the free choice of all common floor coverings make E-NERGY IQ universally applicable.E-NERGY IQ saves costs!E-NERGY IQ is not only an underfloor heating system, but also a fully-fledged heating system. You do not need a gas connection, fuel storage tank, central heating or heating circuit distributor. The system is maintenance-free.A further advantage: With E-NERGY IQ you do not need a boiler room and thus gain additional living space.4As soon as moisture is involved, whether in renovation or new construction, it becomes a problem. E-NERGY IQ is a dry construction system without moisture, without dry heating, without water! The floor covering can therefore be laid quickly. This is a must for renovation, because too much moisture damages walls, ceilings and wooden fixtures. Drywall construction is modern and often useful. In addition, there is the right underfloor heating for this purpose.In the morning: 06:00 – 08:00 AMHeated rooms: bathroom & kitchenIn the daytime: 08:00 AM – 03:00 PMHeated rooms: noneIn the evening: 03:00 – 10:00 PMHeated rooms: kitchen,living room & bathroomDirect heating with quick and even heat distributionAll floor coverings possible for flexible and individual designDry installation for a short construction timeLow construction, ideal for renovationAdvantages of drywall constructionNeeds-based at any time of the day5E-NERGY IQ heating elements are only 20 mm thick, can withstand pressure and are insulated. As a dry construction system, it is ideal for renovation andnew construction. The factory-fitted aluminium heat distribution plates within the perfectly fitting channels for the self-regulating heating cable ensure rapid heating. Few system components, high thermal output, short installation times – no screed that causes inertia. That’s how heating elements should be if they are meant to save energy and provide comfort. An underfloor heating system that heats when necessary, instead of being constantly switched on.E-NERGY IQ EPS 20E-NERGY IQ ÖKO 20DataBase panelPolystyrene panel EPS 035 DEO; 240kPaWood fibre 140 kPaThermal conductivity panelAluminium 0.5 mm, for heating (U-contour)Thermal conductivity0.035 W/mK 0.050 W/mKThermal resistance0.55 m² K/W 0.39 m² K/WCompressive stress240 kPa at 10 % compression acc. to DIN EN 826140 kPa at 10 % compression acc. to DIN EN 826Fire behavior acc. to DIN EN 13501-1EEFactory-fixed aluminium plates for quick and even heat dissipationIntegrated thermal insulation to minimize heat lossesHigh pressure resistance for maximum stabilityFew system parts for short assembly timesE-NERGY IQ heating elements6DataWeightca. 100 g/mSizeca. 13 x 5 mm Max. surrounding temperature+65 °CMin. working temperature0 °CMin. bending radius25 mmNominal voltage230 VRating10 – 25 W/m (depending on floor construction)Max. heating cable length100 m (Special appl.: Direct connection to thermostats, max. 60 m < 10 m²) Automatic cutout (C-Characterisitc)20 A (Special appl.: 16 A Direct connection to thermostats, max. 60 m < 10 m²)Residual current protection halter30 mAThe system heating cable regulates itself. It automatically adjusts the output according to demand and therefore cannot overheat. The fascinating thing about it is that this regulating effect happens inch-perfect. Under furniture, for example, the cable has lower heat dissipation than in front of the window. This function makes the electrical underfloor heating energy-saving and comfortable.Self-regulating heating cable for modern underfloor heatingAutomatic power adjustment for cost-efficient heatingEasy installation and short construction timeNo overheating for a secure home E-NERGY IQ system heating cable7DataVoltage 100-240 VMax. Backup16 AColourpure whiteOutputmax. 16 ATerminal cross section1.5-2.5 mm²Standby-Power input0.4 WDegree of protection of enclosureIP21SizeH/ 82, B/ 82, T/ 40 mmDisplay176x220 Pixel TFT – TouchSwitch frameenclosed | optionally suitable for common switch frames 55x55App operation (WiFi only) | WiFiiOS oder Android | IEEE 802.11 b/g/n - 2.4 GHzWhat was previously hard to understand in the boiler room is now a small, sha-pely, digital and understandable switch: the E-NERGY IQ room thermostat. It is your heating system that you will understand! You decide when, how long and where the heating is switched on and which room temperature is desired. This thermostat saves energy: It heats up quickly when it is too cool and switched off when there is enough heat.Comfort via floor sensors for optimum comfortDetection of open windows prevents high energy costsEnergy-saving function for an easy night operation App-enabled - control via smartphoneE-NERGY IQ room thermostat8ConstructionsSystem E-NERGY IQ + CF FLOOR STRONGBOARD FL 12334561Tiles ≥ 10 mm | natural stone ≥ 15 mm 2STRONGBOARD FL5mm3Adhesive (MAPEI Ecofix)4Underfloor heating E-NERGY IQ inkl. heating cable20mm5Support batten (20 mm)6Edge insulation strips IDEAL EPS 7Possible moisture barrier (bond with floor)25mmRoom temperature °CRλ,B = 0.00 m²K/WRλ,B = 0.05 m²K/WThermal output20118 W/m²80 W/m²2480 W/m²54 W/m²Tiles ≥ 10 x 10 cm → ≤ 80 x 80 cm (aspect ratio 1:1 bis 3:1)Joint width: tiles ≤ 30 x 30 cm = min. 3 mm; ≤ 40 x 40 cm = min. 4 mm; ≤ 80 x 80 cm = min. 5 mmSystem E-NERGY IQ + CF FLOOR DIRECT 1.51234561Parquet ≥ 15 mm (floating installation)2Thermal conductive layer CF FLOOR DIRECT 1.51.5mm3Underfloor heating E-NERGY IQ inkl. heating cable20mm4Support batten (20 mm)5Edge insulation strips IDEAL EPS 6Adhesive (MAPEI Ecofix)21.5mmRoom temperature °CRλ,B = 0.10 m²K/WRλ,B = 0.15 m²K/WThermal output2067 W/m²53 W/m²2446 W/m²36 W/m²Directly laid parquet ≥ 15 mm → ≤ 22 mmSuitable for tiles and laminate Immediate laying of the floor covering without waiting timesHigh heat conduction and fast heatingThermally conductive through aluminum coating Impact sound insulationLow weight and low construction9System E-NERGY IQ + CF FLOOR PRO 12 1234561Any flooring possible2Thermal conductive layer CF FLOOR PRO 1212mm3Underfloor heating E-NERGY IQ inkl. heating cable20mm4Support batten (20 mm)5Edge insulation strips IDEAL EPS 6Possible moisture barrier (bond with floor)32mmSystem E-NERGY IQ + Fermacell 20 mm (2 E 11)1234561Any flooring possible2Fermacell dry screed element 2 E 1120mm3Underfloor heating E-NERGY IQ inkl. heating cable20mm4Support batten (20 mm)5Edge insulation strips IDEAL EPS 6Possible moisture barrier (bond with floor)40mmRoom temperature °CRλ,B = 0.00 m²K/WRλ,B = 0.05 m²K/WRλ,B = 0.10 m²K/WRλ,B = 0.15 m²K/WThermal output20100 W/m²71 W/m²55 W/m²45 W/m²2467 W/m²48 W/m²38 W/m²31 W/m²Room temperature °CRλ,B = 0.00 m²K/WRλ,B = 0.05 m²K/WRλ,B = 0.10 m²K/WRλ,B = 0.15 m²K/WThermal output2082 W/m²62 W/m²50 W/m²41 W/m²2456 W/m²42 W/m²34 W/m²29 W/m²Fibre cement board - Suitable for damp rooms Thin and robust – only 12 mm installation height with 3,0 kN load capacityFlexibility in flooring – any flooring possible, also tiles up to 100 x 100 cmImmediately walkable and assignable – faster building process Known installation technology – cost-effectiveAny flooring possible – flexible in useNext >